As an Amazon Associate I earn from qualifying purchases.

BILITOOLS 3L One Person Brake Fluid Bleeder Kit Compatible with Tesla Model S X Manual Brake Pressure Bleeding Tool

$75.99

Added to wishlistRemoved from wishlist 0


Price: $75.99
(as of Mar 31,2022 11:47:02 UTC – Details)


Product Description

1
1

2
2

DIY Brake fluid change, start to finish, with the BILITOOLS Brake and Clutch fluid bleeder. One of the most popular DIY bleeders you can get.

Feature:

Suitable for Tesla Model S and Model X
One-man bleeding system requiring no external power source.
Reservoir holds 3 Liters of fluid.
Flush the entire system with one fill without the risk of running the reservoir dry.
Fitted with adapter cap, which is specially designed to allow pressure bleeders to be securely connected to the brake master cylinder reservoir.(Compatible with Tesla S X)
1 L Brake Fluid Bleed Tank with holding chain, hook and bleeding screw adapter.
Included male mini quick disconnect suitable for a wide variety of adapter cap.

Product Detail

4
4

Operation Guide

3-1

3-1

3-2

3-2

3-3

3-3

Step 1:

Open the container side cap to fill fresh brake fluid with adequate volume into tho container. Then Refit the cap firmly (do not over tighten).

Step 2:

Remove the cap from the vehicle’s brake reservoir, then fit the brake bleed adapter with the quick connector over the reservoir neck.

Step 3:

Pressurize the bleeder to the level recommended in the vehicle service manual. DO NOT exceed 30psi (2bar). Higher pressures may damage your vehicle’s hydraulic system and could result in serious injury.

3.4

3.4

3.5

3.5

3.6

3.6

Step 4:

Determine the correct brake bleeding sequence from your vehicle’s service manual. Attach bleed tube to bleed valve at the cylinder to be bled, open bleed valve and bleed until fluid runs clear and free of bubbles.

Step 5:

When complete, pressing the pressure release valve to release pressure. Remove the cap from the fluid reservoir, taking care to avoid spilling any fluid that remains in the tube.

Step 6:

Replace fluid reservoir cap on your vehicle, checking that the fluid level is at the maximum level indicated on the vehicle reservoir. Before driving your vehicle, carefully check for leaks and test for proper brake operation.

6
6

Include
1 x Brake Bleeding Wrench+6 x Socket+1 x Hose
1 x Vacuum Brake Bleeder (3L)+1 x Brake Fluid Refill Bottle (1L)+1 x Silicon Oil Extract Hose (63 inches)+1 x Silicon Bleeding Hose with Rubber Adapter (63 inches)+16 x Bleed Screw Adapters
2 x Coil Spring Compressors+1 x Fixed Bracket +1 x Suitcase
3 x Coil Spring Compressors+1 x Suitcase
10 x Drills Bits +10 x Screw Taps+10 x Installation Tools +10 x Break Pin Tools+220 x Thread Inserts+1 x L Wrench

One-person brake and clutch bleeding the professional way. Bleeding requires no external power source – simply fill and pump.
Reservoir holds 3L of fluid – flush the entire system with one fill, without the risk of running the reservoir dry. Fit with A brake fluid receiver bottle with a 1L capacity.
Specially designed to allow pressure bleeders to be securely connected to the brake master cylinder reservoir(Compatible with Tesla S/X). Included male mini quick disconnect suitable for a wide variety of adapter cap.
Max. Pressure : 4 bar / 58 psi. Pressure range makes the unit suitable for use with ABS systems. Determine the correct brake bleeding pressure from your vehicle’s service manual.
Attention: After connecting to the brake master cylinder reservoir, please lift the quick connector part and tighten the black adapter!!!

BILITOOLS 3L One Person Brake Fluid Bleeder Kit Compatible with Tesla Model S X Manual Brake Pressure Bleeding Tool
Outdoor Woman's
Logo